How Do I Calibrate a Nordic Track Treadmill?

Tech Tip: Please make sure you calibrate your treadmill after installing Any controller, motor or console. You can NOT over calibrate your treadmill. You want to make sure you adjust your pedometer for the correct operating speed and incline adjustment. don't know how to calibrate? It's in your owners manual. Or read it here.

Plug in you treadmill, do not stand on the walking belt.

Hold down the "Stop" and "Speed +" key and insert the safety key or magnet, let go of the two keys. Now press "Stop" key once. This puts you into the level 2 of calibration. Press the "Speed +" key slowly until you see 85 on the console, (at this point the display is going to show the percentage of motor usage and also the actual walking belt speed) at 85% motor usage your top speed should be between 10 and 10.5 MPH or (of 12 or 12.5) depending on the treadmill. You must know your treadmills top speed. (Important the motor may be damaged if you set the maximum speed higher than the maximum speed that your treadmill is mades for). If the speed is higher than 10.5 or 12.5 then you need to turn the potentiometer down to the correct level. If the speed is to low you need to turn the potentiometer higher. Once the speed is correct you are done calibrating the Speed. Press the (-) speed key to lower the percentage to (0). Next press the incline (+) button, this will make the incline motor go all the way to the maximum incline and come all the way down to the level position. Then remove the safety key and the treadmill will reset into the normal manual mode, when you re-insert the safety key.


If you should have problems performing calibration on your Nordictrack Treadmill, Please Contact Us, or Request Service. We can check and correct your present concern and any other symptoms we may see that your having problems with. If you live in Los Angeles County, Ventura County, Santa Barbara County and Surrounding Cities, we can come to you directly. Click, Call, or text us today your problem statement and we can schedule you an appointment. **FYI:Flat Rate Service Calls: $150.00, Labor: $75.00 if it goes after 1 hour.

You can always call Michael at 805-424-9515. Business Hours: Monday - Friday 8:30am - 7pm PST, Saturday 9:00am - 5pm by appointment only.


by: Michael Mullins

2/24/2021

0 views0 comments